中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  GB/T 32065.6-2015
海洋仪器环境试验方法 第6部分:恒定湿热试验(中英文版)
Environmental test methods for oceanographic instruments—Part 6:Damp heat, steady state
  GB/T 32065.5-2015
海洋仪器环境试验方法 第5部分:高温贮存试验(中英文版)
Environmental test methods for oceanographic instruments—Part 5:Dry heat storage
  GB/T 32065.4-2015
海洋仪器环境试验方法 第4部分:高温试验(中英文版)
Environmental test methods for oceanographic instruments—Part 4:Dry heat
  GB/T 32065.2-2015
海洋仪器环境试验方法 第2部分:低温试验(中英文版)
Environmental test methods for oceanographic instruments—Part 2:Cold
  GB/T 32065.3-2015
海洋仪器环境试验方法 第3部分:低温贮存试验(中英文版)
Environmental test methods for oceanographic instruments—Part 3: Cold storage
  HG/T 4862-2015
甲醇制低碳烯烃催化剂反应性能试验方法(中英文版)
Reaction performance test methods of catalyst for methanol to light olefins
  HG/T 4861-2015
甲醇制低碳烯烃催化剂物理性能试验方法(中英文版)
Physical performance test methods of catalyst for methanol to light olefins
  GB/T 12967.4-2014
铝及铝合金阳极氧化膜检测方法 第4部分:着色阳极氧化膜耐紫外光性能的测定(中英文版)
Test methods for anodic oxidation coatings of aluminium and aluminium alloys―Part 4:Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
  GB/T 12967.5-2013
铝及铝合金阳极氧化膜检测方法 第5部分:用变形法评定阳极氧化膜的抗破裂性(中英文版)
Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 5:Assessment of resistance of anodic oxidation coatings to cracking by deformation
  GB/T 12967.7-2010
铝及铝合金阳极氧化膜检测方法 第7部分:用落砂试验仪测定阳极氧化膜的耐磨性(中英文版)
Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 7:Measurement of abrasion resistance of anodicoxidation coatings by sand falling test apparatus
  GB/T 13255.8-2009
工业用己内酰胺试验方法 第8部分:环己酮肟含量的测定(中英文版)
Test methods of caprolactam for industrial use - Part 8: Determination of cyclohexanone oxime content
  GB/T 12967.6-2008
铝及铝合金阳极氧化膜检测方法 第6部分:目视观察法检验着色阳极氧化膜色差和外观质量(中英文版)
Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method
  GB/T 12967.3-2008
铝及铝合金阳极氧化膜检测方法 第3部分:铜加速乙酸盐雾试验(CASS试验)(中英文版)
Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 3 : Copper accelerated acetic acid salt spray test(CASS test)
  GB/T 12967.2-2008
铝及铝合金阳极氧化膜检测方法 第2部分:用轮式磨损试验仪测定阳极氧化膜的耐磨性和耐磨系数(中英文版)
Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 2: measurement of wear risistance and wear index of anodic oxidation coatings with an abrasive wheel wear test appaeratus
  GB/T 12967.1-2008
铝及铝合金阳极氧化膜检测方法 第1部分:用喷磨试验仪测定阳极氧化膜的平均耐磨性(中英文版)
Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 1:Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test Apparatus
  GB/T 7917.4-1987
化妆品卫生化学标准检验方法 甲醇(中英文版)
Standard methods of hygienic test forcosmetics--Methanol

找到:36條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1 2